Looking for a more durable solution for your mold release applications? Below we share some of the benefits of the Teflon™ FEP two-coat system. You may have heard of the product, but the benefits it offers your shop are highlighted in the short description below.
This system has extreme release capabilities for mold and food processing applications, providesnonstick, chemical, and corrosion resistancefor low abrasion release applications, and can be used on steel, stainless steel, and aluminum.
To get the most out of the coatings’ release characteristics, Intech Services recommends the thickness be no less than 2 mils but not exceed 5 mils.
If you have a plastic or rubber molded material that needs release over a long period of time, this solution will increase process efficiency and reduce scrap rates.
More features:
For more information on this product, visit this page.
Your shop can benefit from this long-lasting solution. Please contact Intech Services at 302-366-8530 with any questions or for further information.
