A premiere coating system for end-uses that require durability, non-stick, thermal stability, and abrasion-resistant properties. Product OverviewDecades of innovation and technology for the Teflon™ brand have led to significant improvements for this specific coating line. The system is water-based, and a unique blend of PTFE, PFA, and FEP fluoropolymer chemisty. On-smooth technology is utilized for easy adhesion to smooth surfaces when necessary. If your application requires superior durability and ultimate release, we recommend trying the 2-Coat reinforced system.
Properties
Additional Features
Some additional features of the coating line include thin film primer topcoat for quick application and cure, a water base that contributes to easy cleaning and meets low emission environmental standards, and a maximum use temperature of 500° F. Additionally, this line of coatings has excellent non-stick properties, extended service life due to excellent durability, FDA approval for direct food contact, and chemical and abrasion resistance.Application
Process
For best application, apply to aluminum oxide grit blasted metal substrate. If grit blasting is not appropriate, the coating can be applied to a smooth, clean surface. Spray applied primer is force-dried (Ref. 5-8 min. at 120–150 °C (248–302 °F). The temperature of the primer should be between 35–45 °C (95–113 °F) before application of the topcoat. The total system should include a minimum of 5 min. at 428 °C (802 °F) or 3 min. at 435 °C (815 °F) (metal temperature). Peak temperature should not exceed 440 °C (824 °F). See Fact Sheet for complete application information.
Marketing Material
To download this information in a PDF, click here.
For more information on this coating system, call Intech Services, Inc. at (302)366-8530 or visit our website here.
